8-118
Caulk carrier holes as shown on the
picture.
Assembly thrust ring (90-7) into carrier.
(4)
(5)
21078TM104
Assembling floating seal (83) and main
bearing (82)
Assemble floating seal into motor by use
of pressing jig. Grease the contact parts
for floating seal which is assembled into
motor.
Heat bearing at 60~70˚C and then, put
into the motor side.
3)
21078TM105
(1)
(2)
Be sure to maintain it vertical with the
ground when assembling bearing and
floating seal.
侍
21078TM106
Assembling housing
Heat housing at 60~70˚C while clearing it
out and then, assemble floating seal into
housing by use of pressing jig.
Be sure to maintain it vertical with the
ground when assembling floating seal.
4)
21078TM705
(1)
侍
Summary of Contents for HX140L
