2-73
Working of relief valve
Relief valve carries on two functions of followings.
It standardizes a pressure in case of driving a hydraulic motor ; bypasses and extra oil in a motor
inlet related to acceleration of an inertia to an outlet.
In case of an inertia stopped, it forces an equipment stopped, according to generating the
pressure of a brake on the projected side.
Room A is always connected with port A of a motor. If the pressure of port is increased, press
poppet A. And if it is higher than the setting pressure of a spring, the oil of an hydraulic flows from
room A to port B, because poppet A is detached from the contact surface of seat A.
Chamber A
Port A
Port B
Poppet A
21078TM06A
Poppet A
2)
(1)
(2)
Summary of Contents for HX140L
