8-71
125LCR8TM37
125LCR8TM38
125LCR8TM39
Assemble spring (13) (9ea) and ball guide (14)
in cylinder block (12) in that order.
Insert piston assembly (16) in retainer plate (15)
and assemble them in cylinder block.
Spread hydraulic oil on piston assembly.
Take care not to damage each component.
Check cylinder block and piston assembly runs
properly.
Lay casing down horizontally and assemble
cylinder block assembly by matching its spline
with shaft.
Make sure swash plate stays in place.
Check the assembling status of cylinder block by
pressing it.
(7)
(8)
侍
侍
侍
(9)
侍
侍
125LCR8TM40
Assemble separator plate (18) (4EA) and friction
plate (17) (3EA) alternately.
(10)
Summary of Contents for HX140L
