Hyundai HX140L, Manual

Page: 340 / 819

5-55 5-21-34
DTC
Diagnostic Criteria
Application
HCESPN FMI G C W
220
4
Mounting pressure sensor (HCESPN 128 or 205)
(Detection)
(When Boom Down Pilot Pressure Cutoff Solenoid is Off)
10 seconds continuous,
Boom Down Pilot Pressure Cutoff Solenoid drive unit
Measurement Voltage
£
3.0V
(Cancellation)
(When Boom Down Pilot Pressure Cutoff Solenoid is Off)
3 seconds continuous,
Boom Down Pilot Pressure Cutoff Solenoid drive unit
Measurement Voltage > 3.0V
侑
6
(Detection)
(When Boom Down Pilot Pressure Cutoff Solenoid is On)
10 seconds continuous, Boom Down Pilot Pressure Cutoff Solenoid drive
current > 6.5 A
(Cancellation)
(When Boom Down Pilot Pressure Cutoff Solenoid is On)
3 seconds continuous, Boom Down Pilot Pressure Cutoff Solenoid drive
current
£
6.5 A
侑
(Results / Symptoms)
1. Control Function – Boom floating control operation failure
(Checking list)
1. CN-369 (#1) – CN-53 (#08) Checking Open/Short
2. CN-369 (#2) – Fuse box (#19) Checking Open/Short
221
5
Monitor – Selecting attachment(breaker / crusher)
(Detection)
(When ATT Relief Setting EPPR 1 Current is equal or more than 10 mA)
10 seconds continuous, ATT Relief Setting EPPR 1 drive current = 0 mA
(Cancellation)
ATT Relief Setting EPPR 1 Current is equal or more than 10 mA)
3 seconds continuous, ATT Relief Setting EPPR 1 drive current
³
10 mA
侑
6
(Detection)
10 seconds continuous, ATT Relief Setting EPPR 1 drive current > 1.0 A
(Cancellation)
3 seconds continuous, ATT Relief Setting EPPR 1 drive current
£
1.0 A
侑
(Results / Symptoms)
1. Control Function – Option attachment flow control – P1 relief pressure setting failure
(Checking list)
1. CN-365 (#2) – CN-54 (#17) Checking Open/Short
2. CN-365 (#1) – CN-54 (#09) Checking Open/Short
G : General C : Crawler Type W : Wheel Type
侍#
Some error codes are not applied to this machine.
(SERIAL NO. : #0611-)