Hyundai HX140L, Manual

Page: 695 / 819

8-69
125LCR8TM31
125LCR8TM32
Put casing (1) on the worktable. (1)
After applying grease on the external diameter of
oil seal (3), insert oil seal in casing. (2)
ASSEMBLY
Even though assembly is accomplished by
reversing disassembly steps, be careful of the
following.
Repair the damaged part when disassemblying
and prepare parts for exchange in advance.
All parts should be cleaned with cleaner, dried
with compressed air.
Sliding surface, O-ring, bearing and oil seal
should be lubricated with clean hydraulic oil,
prior to final assembly.
Replacement of O-ring and oil sealwith new
parts is generally recommended.
Use a torque wrench to make sure that
assembly fasteners are tightened to specified
values shown table1.
When assembling bolt, spread Loctite.
刮
刯
到
刱
刲
刳
3)
侍