2-11
The flow control characteristic can be
adjusted with the adjusting screw.
Adjust it by loosening the hexagon nut
(801) and by tightening (or loosening) the
hexagonal socket head screw (924).
Tightening the screw shifts the control
chart to the right as shown in the figure.
Adjusting value
Adjustment of flow control characteristic
侍
801
924
到
Pilot pressure, Pi
Delivery flow, Q
21092MP11
Speed
Adjustment of flow control
characteristic
Tightening
amount of
adjusting
screw (924)
Flow control
starting
pressure
change
amount
Flow change
amount
(min
-1
)
(Turn)
(kgf/cm
2
)
(
再
/min)
1900
+1/4
+1.6
+9
Summary of Contents for HX140L
