![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330765.webp)
8-139
14
15
3
6
10
12
4
5
11
7
11
9
1
Secure with hand
Work bench
V block
Wooden block
Remove six slipper seals (7) and O-ring
(9), two wear ring (11) from hub (1).
(5)
Place hub (1) on a V-block and by using a
wood buffer at the shaft end, hit out shaft
(2) to about 1/2 from the body with a
hammer.
Take care not to damage the shaft (2)
when remove hub (1) or rest it sideway.
Put a fitting mark on hub (1) and shaft (2).
(4)
侍
侍
Remove shim (6) and O-ring (10).
Remove retainer ring (12), spacer (4) and
shim (5).
(2)
(3)
DISASSEMBLY
Before the disassembly, clean the turning
joint.
Remove bolts (14), washer (15) and cover
(3).
2)
侍
(1)
21078DA10
21078DA11
8-14(3) (360-7)
21078DA12
Summary of Contents for HX140L
