![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330345.webp)
5-60
5-21-39
DTC
Diagnostic Criteria
Application
HCESPN FMI
G
C
W
530
0
10 seconds continuous, Travel Forward Press. Sensor Measurement Voltage
> 5.2V
侑
1
10 seconds continuous, 0.3V
£
Travel Forward Press. Sensor Measurement
Voltage < 0.8V
侑
4
10 seconds continuous, Travel Forward Press. Sensor Measurement Voltage
< 0.3V
侑
(Results / Symptoms)
1. Monitor – Travel Forward Press. display failure
2. Control Function – Driving interoperability power control operation failure
(Checking list)
1. CD-73 (#B) – CN-51 (#20) Checking Open/Short
2. CD-73 (#A) – CN-51 (#32) Checking Open/Short
3. CD-73 (#C) – CN-51 (#31) Checking Open/Short
531
1
10 seconds continuous, 0.3V
£
Travel Reverse Press. Sensor Measurement
Voltage < 0.8V
侑
4
10 seconds continuous, Travel Reverse Press. Sensor Measurement Voltage
< 0.3V
侑
(Results / Symptoms)
1. Monitor – Travel Reverse Press. display failure
2. Control Function – Driving interoperability power control operation failure
(Checking list)
1. CD-74 (#B) – CN-52 (#20) Checking Open/Short
2. CD-74 (#A) – CN-51 (#32) Checking Open/Short
3. CD-74 (#C) – CN-51 (#31) Checking Open/Short
705
0
10 seconds continuous, Battery input Voltage > 35V
侑
1
10 seconds continuous, Battery input Voltage < 18V
侑
(Results / Symptoms)
1. Control Function – Startup impossibility
(Checking list)
1. CS-74A (#1) – CN-51 (#01) Checking Open/Short
707
1
(When Engine is equal or more than 400 rpm) 10 seconds continuous,
Alternator Node L Measurement Voltage < 18V
(In case 12v goods, Alternator Node La Measurement Voltage < 9V)
侑
(Results / Symptoms)
1. Control Function – Battery charging circuit failure
(Checking list)
1. CS-74A (#1) – CN-51 (#26) Checking Open/Short
G : General C : Crawler Type W : Wheel Type
侍#
Some error codes are not applied to this machine.
(SERIAL NO. : #0611-)
Summary of Contents for HX140L
