![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330336.webp)
5-51
5-21-30
DTC
Diagnostic Criteria
Application
HCESPN FMI
G
C
W
171
4
Monitor – Selecting attachment(crusher)
(Detection)
(When Attachment Safety Solenoid is Off)
10 seconds continuous, Attachment Safety Solenoid drive unit Measurement
Voltage
£
3.0V
(Cancellation)
(When Attachment Safety Solenoid is Off)
3 seconds continuous, Attachment Safety Solenoid drive unit Measurement
Voltage > 3.0V
侑
6
(Detection)
(When Attachment Safety Solenoid is On)
10 seconds continuous, Attachment Safety Solenoid drive current > 6.5 A
(Cancellation)
(When Attachment Safety Solenoid is On)
3 seconds continuous, Attachment Safety Solenoid drive current
£
6.5 A
侑
(Results / Symptoms)
1. Control Function – Option attachment flow control – Option spool pilot pressure cut off failure
(crusher mode)
(Checking list)
1. CN-149 (#1) – CN-53 (#09) Checking Open/Short
2. CN-149 (#2) – Fuse box (#19) Checking Open/Short
179
4
Monitor – Selecting attachment(breaker / crusher)
(Detection)
(When Breaker Operating Solenoid is Off)
10 seconds continuous, Attachment Safety Solenoid drive unit Measurement
Voltage
£
3.0V
(Cancellation)
(When Breaker Operating Solenoid is Off)
3 seconds continuous, Attachment Safety Solenoid drive unit Measurement
Voltage > 3.0V
侑
6
(Detection)
(When Breaker Operating Solenoid is On)
10 seconds continuous, Attachment Safety Solenoid drive current > 6.5 A
(Cancellation)
(When Breaker Operating Solenoid is On)
3 seconds continuous, Attachment Safety Solenoid drive current
£
6.5 A
侑
(Results / Symptoms)
1. Control Function – Option attachment flow control – Breaker operation failure (breaker mode)
(Checking list)
1. CN-66 (#1) – CN-52 (#08) Checking Open/Short
2. CN-66 (#2) – Fuse box (#31) Checking Open/Short
G : General C : Crawler Type W : Wheel Type
侍#
Some error codes are not applied to this machine.
(SERIAL NO. : #0611-)
Summary of Contents for HX140L
