Honeywell SYA14 Series, Manual

Page: 632 / 737

FF-SR05936 Series
ISSUE 1
PK 107010-01
2
PK 107010-01-EN FR26 GLO 398 Printed in Germany
SPECIFICATIONS
Input
Nominal voltage 120 VAC (-15%, +10%), 230 VAC (-20%, +10%), 24 VDC (-20%, +10%)
Nominal consumption 120 or 230 VAC: 4 VA; 24 VDC: 2.5 W
Nominal frequency 50 to 60 Hz
Measuring input protection 690 VAC
Engaging voltage 40 mV
Release voltage 20 mV
Output
Contact complement 2 NO contacts, 2 NC contacts
Contact time Safety relay, positive-guided
Response time 2s after EMF drops below 20 mV
Switching Capability
Current Range (min. to max.)
Power factor = 1 with resistive load
10 mA to 10A
Current Range (min. to max.) 10mA to 10A
Voltage Range (min. to max.) 10 to 250VAC/DC
Typical Electrical Life Expectancy
3A
5A
10A
Power factor = 1 at 230 VAC/DC (note 1)
1,000,000 operations
500,000 operations
220,000 operations
Typical Power Factor (cos
ϕϕ
)
0.3
0.5
0.7
1.0
Limitation Factor (note 2)
0.45
0.70
0.85
1.00
Fuse rating 6 A gL (max.)
Mechanical life Ten million switching operations
General
Temperature range
-15
°
C to + 55
°
C (5
°
F to 131
°
F) at max. 90% humidity
Sealing Housing IP40 Terminals IP 20
Housing material Thermoplastic
Vibration resistance Amplitude 0.35 mm Frequency 10 to 55 Hz
Conductor connection 1 x 4 mm
2
solid (max.) [12 AWG] or 2 x 1.5 mm
2
(max.) [16 AWG] stranded wire with sleeve DIN 46288
Conductor attachment M 3,5 screw terminals; wire contacts are enclosed to prevent electrical shock
Mounting Quick install rail mounting EN 50022-35
Weight 325 g (0.72 lb.)
NOTE 1: Install arc sup-
pression device across load to
avoid module contact arcing
and ensure specified relay life
expectancy.
NOTE 2:
Total operations =
operations at power factor 1
multiplied by the limitation
factor. if the power factor is
0.5 at 230 vac, 3A (1,000,000
operations), the limitation
factor is 0.70. 1,000,000 x
0.70 = 700,000 total
operations.
FIG 1. CONTACT LIFE FOR 100%
RESISTIVE LOAD (typical) (note 1)
power factor = 1 (cos
ϕ
)
FIG 2. LIMITATION FACTOR FOR
INDUCTIVE LOADS (note 2)
power factor < 1 (cos
ϕ
)