Honeywell SYA14 Series, Manual

Page: 640 / 737

2 107011-10 EN FR26 GLO 0499 Printed in Germany
SPECIFICATIONS
Input
Nominal voltage 120 VAC (-15%, +10%), 230 VAC (-20%, +10%), 24 VDC (-10%, +10%)
Nominal consumption 120, 230 VAC: 4 VA; 24 VDC: 2.5 W
Nominal frequency 50 to 60 Hz
Nominal voltage at S13/S23 24 VDC / 0 VDC (provided by control module)
Nominal input current between S13/S14
and S23/S24
35 mA (control line length must not exceed 30 m (98 ft) and must be routed
separately from power cables)
Time required for simultaneous contact
closure
S13/S14 and S23/S24
0.5 s
Output
Contact complement 2 NO contacts
Contact type Safety relay, positive-guided
Response time Activation/deactivation by inputs S13/S14 and S23/S24: 30 ms
Switching Capability Power factor = 1 with resistive load
Current Range (min. to max.) 1 mA to 10A (see caution)
Voltage Range (min. to max.) 0.1 to 250 VAC/DC
Typical Electrical Life Expectancy
3A
5A
10A
Power factor = 1 at 230 VAC/DC (note 1)
1,000,000 operations
500,000 operations
220,000 operations
Typical Power Factor (cos
ϕ
)
0.3
0.5
0.7
1.0
Limitation Factor (note 2)
0.45
0.70
0.85
1.00
Fuse rating 6 A gL (max.)
Mechanical life Ten million switching operations
General
Temperature range -15
°
C to + 55
°
C (5
°
F to 131
°
F) at 90% humidity (max.)
Sealing Housing IP 40; Terminals IP 20
Housing material Thermoplastic
Vibration resistance Amplitude 0.35 mm; Frequency 10 to 55 Hz
Conductor connection 1 x 4 mm
2
solid (max.) [12 AWG] or 2 x 1.5 mm
2
(max.) [16 AWG] stranded wire with sleeve
Conductor attachment M 3,5 screw terminals; wire contacts are enclosed to prevent electrical shock
Mounting Quick install rail mounting EN 50022-35
Weight 410 g (0.90 lb.)
NOTE 1: Install arc
suppression device
across load to avoid
module contact arcing
and ensure specified
relay life expectancy.
NOTE 2: Total
operations = operations at
power factor 1 multiplied
by the limitation factor. If
the power factor is 0.5 at
230 VAC, 3A (1,000,000
operations), the limitation
factor is 0.70. 1,000,000
x 0.70 = 700,000 total
operations.
FIG 1. CONTACT LIFE FOR 100%
RESISTIVE LOAD (typical) (note 1)
power factor = 1 (cos
ϕ
)
FIG 2. LIMITATION FACTOR FOR
INDUCTIVE LOADS (note 2)
power factor < 1 (cos
ϕ
)
CAUTION
CONTACT DAMAGE
To ensure the 1 mA capability during the lifetime of the contact, NEVER exceed 300 mA and 60 V.
Failure to comply with these instructions will result in product damage.