Honeywell SYA14 Series Manual Download Page 455

Page: 455 / 737

Cable Pull limit Switch Indicators

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as

being free of defective materials and faulty

workmanship. Commencing with date of shipment,

Honeywell's warranty runs for 18 months. If

warranted goods are returned to Honeywell during
that period of coverage, Honeywell will repair or

replace without charge those items it finds

defective.

The foregoing is Buyer's sole remedy and

is in lieu of all other warranties, expressed or

implied, including those of merchantability and
fitness for a particular purpose.

For application assistance, current specifications,

pricing or name of the nearest Authorized

Distributor, contact a nearby sales office. Or call:

PK 8157 0

1-800-537-6945 USA
1-416-293-8111 Canada
1-815-235-6847 International
http://www.honeywell.sensing.com
[email protected]

Specifications not affecting form, fit or function

may change without notice. The information we

supply is believed to be accurate and reliable as of
this printing. However, we assume no responsibility
for its use.

While we provide application assistance,

personally and through our literature, it is up to the
customer to determine the suitability of the product
in the application.

Honeywell

Helping You Control Your World

Summary of Contents for SYA14 Series


































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SYA14 Series

Reviews:

Related manuals for SYA14 Series

Brands by name

Popular brands

Honeywell SYA14 Series, Manual

Search results

Summary of Contents for SYA14 Series

Reviews:

Related manuals for SYA14 Series

Brands by name

Popular brands