Honeywell SYA14 Series, Manual

Page: 49 / 737

107031-23 EN FR26 GLO 1199 Printed in France 49
4.3 Connector wiring for the FF-SYA
qqqqq
Q2 light curtains
All the FF-SYA
qqqqq
Q2 light curtains have straight male receptacles compatible with
Brad Harrison Mini-Change plugs. The plugs can be ordered separetely (see Accessories
order guide section to choose the right plugs). The emitter uses a 5-pole male receptacle
and the receiver uses a 7-pole male receptacle. The figures below illustrate a front view of
each male receptacle.
Figure 4-3 View of the light curtain receptacles
(compatible with Brad Harrison Mini-Change plugs)
Face view of the emitter receptacle
(7/8’’ – 16UNS – 2A thread
Face view of the receiver receptacle
(1’’ – 16UN – 2A thread)
4.4 Power Wiring (emitter and receiver teminals 1 and 2)
FF-SYA Series light curtains operate on 24 volts DC +/- 15% and are protected against
reversed polarity. They are equipped with DC/DC converters to provide the galvanic
insulation made mandatory by the IEC/EN 61496-1 standard for type 4 electrosensitive
protective equipment. As a result, an additional galvanic insulated means (like a
dedicated power supply with DC/DC converter) is not required.
The power consumption for the emitter and for the receiver are given in the following
table :
Model
032 048 064 080 096 112 128 144 160 176
Power
consumption (W)
FF-SYA14
Emitter 5 5 6 6 6 7 7 - - -
Receiver 3.5 4 4 4.5 5 5 5.5 - - -
FF-SYA30
Emitter 4 4 5 5 5 6 6 6 6 6
Receiver 3.5 3.5 4 4 4 4 4.5 4.5 4.5 4.5
FF-SYA60
Emitter 4 4 5 5 5 6 6 6 6 6
Receiver
3.5 3.5 3.5 4 4 4 4 4.5 4.5 4.5