manualshive.com logo in svg

Honeywell SYA14 Series, Manual

The Honeywell SYA14 Series user manual is available for free download at manualshive.com. This comprehensive manual provides step-by-step instructions and essential information to optimize the performance of your SYA14 Series product. Get the most out of your device with this user-friendly manual.

Share
Download
background image

107022-14 EN FR26 GLO 0100 Printed in Germany

6

1.

Important Information

1.1

Overview

Thank you for purchasing this Honeywell safety product.  The FF-LS Series miniature safety light curtain is an ultra-compact
infrared multi-beam device designed to increase the protection of operators working with dangerous machines. The FF-LS
Series product is ideal for the protection of work stations where space is critical.

1.2

Read And Understand This Instruction Manual

•

  FF-LS Series safety light curtain devices described in this manual are designed to protect humans from danger zones

normally associated with the moving parts of machinery.

 

•

  To ensure the full benefits of this protection, the safety light curtains described in this manual must be properly selected,

installed, maintained and operated.

1.3

Organization of Installation Manual

This installation manual consists of the following:

•

  Important Information contains important highlighted information, the manual’s organization, control reliability

information, approvals, standards, regulations and directives.

 

•

  Description and Operation describes the miniature safety light curtain and the terms and concepts related to operation.

 

•

  Installation explains how to properly install the miniature safety light curtains.

 

•

  Electrical Connections covers electrical installation and wiring diagram information.  This section also contains a

sensing unit and control unit compatibility table.

 

•

  Inspection and Maintenance contains inspection, cleaning, maintenance, troubleshooting, and repair information.

 

•

  Order Guides provide  catalog listings of safety light curtain sets, mounting brackets, cables, power supplies, fuses,

control units, sensing units, test rods and control unit hardware kit.  This section also contains a sensing unit and control

unit compatibility table.

 

•

  Warranty Information contains important contact information related to sales and service.

 

•

  Index contains keywords and their associated pages related to topics found throughout this manual.

 

•

  EC-type Examination Certificate (from approval agency) is available upon request from the Honeywell European

Photoelectric Center Quality Assurance Department (CE Declaration of Conformity is provided at the back of this

manual).

1.4

Important Highlighted Information

Important danger, warning, caution and notices are highlighted throughout the manual as follows:

A DANGER symbol indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.

A WARNING symbol indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.

A CAUTION symbol indicates a potentially hazardous situation which, if not avoided, may result in property
damage.

A NOTICE symbol indicates important information that must be remembered and aids in job performance.

1.5

Control Reliability

“Control Reliability” means that, “the device, system or interface shall be designed, constructed and installed such that a
single component failure within the device, interface or system shall not prevent normal stopping action from taking place
but shall prevent a successive machine cycle.” (ANSI B11.19-1990, 5.5)

Summary of Contents for SYA14 Series


































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SYA14 Series

A.O. Smith BT-100 Wiring Diagram preview
BT-100
Brand: A.O. Smith Pages: 2
Lasko 5900 Operating Manual preview
5900
Brand: Lasko Pages: 4
Lasko 6367 Operating Manual preview
6367
Brand: Lasko Pages: 6
Patio Plus PH series Installation, Operating, & Maintenance Instructions preview
PH series
Brand: Patio Plus Pages: 20
U-Prox HW Installation And Programming Manual preview
HW
Brand: U-Prox Pages: 17
Reality Leuchten R087-01 Manual preview
R087-01
Brand: Reality Leuchten Pages: 86
Uberhaus 05775003 Operator'S Manual preview
05775003
Brand: Uberhaus Pages: 20
TTulpe Outdoor HD-6 Instructions For Use, Installation And Maintenance preview
Outdoor HD-6
Brand: TTulpe Pages: 24
DeLonghi MCH 710T Instruction Manual preview
MCH 710T
Brand: DeLonghi Pages: 5
Macon MWCRW045Z Installation Instructions Manual preview
MWCRW045Z
Brand: Macon Pages: 24
Simfer S.1100.ASL Instruction Manual preview
S.1100.ASL
Brand: Simfer Pages: 15
heatness VCIR-a Instruction Manual preview
VCIR-a
Brand: heatness Pages: 54
Cadet Apex72 Owner'S Manual preview
Apex72
Brand: Cadet Pages: 12
COMFORT-AIRE IR30S Installation & Operation Manual preview
IR30S
Brand: COMFORT-AIRE Pages: 8
Paramount Fitness L10-PC-BK Owner'S Manual preview
L10-PC-BK
Brand: Paramount Fitness Pages: 15
Gordon-Ray RTH-75A Installation, Operation, Service, And Parts Manual preview
RTH-75A
Brand: Gordon-Ray Pages: 20
Watkins-Johnson Company R1910 Manual preview
R1910
Brand: Watkins-Johnson Company Pages: 50
Omcan PH-CN-2270-P Instruction Manual preview
PH-CN-2270-P
Brand: Omcan Pages: 20

Brands by name

Popular brands

Load more brands