Honeywell SYA14 Series, Manual

Page: 42 / 737

42
107031-23 EN FR26 GLO 1199 Printed in France
3.8 Mounting Hardware
FF-SYA Series light curtains are designed with an easy to use T-slot mounting system.
Two standard mounting brackets are delivered together with the light curtain including the
necessary mounting accessories (bolts, nuts, and washers) to mount one emitter or one
receiver unit.
ELECTRICAL SHOCK
Properly ground FF-SYA Series light curtain housing by connecting earth ground through
the connector. Failure to comply with these instructions could result in death or
serious injury.
To mount one complete light curtain system, use two pairs of brackets, one for the emitter
and one for the receiver. The emitter and receiver may required different types of
mounting brackets based on application requirements.
OPERATION UNDER HIGH VIBRATIONS
In case of high vibrations, an additional pair of brackets (total 3 pairs) must be used for
light curtain systems with protection heights greater or equal to 1000 mm to maintain
correct alignment (see Order guide section) .
3.8.1 T-slot Mounting System
The FF-SYA Series T-slot mounting design allows bracket placement anywhere along the
sides of the light curtain housing (see figure below). The two T-slots are designed to fit
the head of the delivered M4 T-shape bolts.
Figure 3-18 T-slots with Standard Mounting Bracket (Right-angle and straight
brackets)
86.5 / 3.40
60.0 / 2.36
84.
0 /
3.
3
42.
0 /
1.
65
22.5 / 0.88
50.0 / 1.97
15°
52.
0 /
2.
05
42.
0 /
1.
65
86.5 / 3.40
60.0 / 2.36
26.7 / 1.05
50.0 / 1.97
15°
Note: On the SYA
qqqqq
C2 version, the position of the hirschmann connector can be
adjusted with a 15° angular pitch.
F
SYA4
1
F
SYA4
2