Honeywell SYA14 Series, Manual

Page: 10 / 737

10
107031-23 EN FR26 GLO 1199 Printed in France
•
Installation and use of the FF-SYA light curtain must comply with the following
applicable European standards (non exhaustive list):
Regulation Title
EN 292 Safety of Machinery - Basic concepts, general principles for design
EN 60204 - 1 Safety of Machinery - Electrical equipment of machines
EN 954 - 1 Safety of Machinery - Safety related parts of control systems
IEC/EN 61496-1 Safety of Machinery - Electrosensitive protective equipment - part 1:
General requirements and tests
IEC/pr EN 61496-2 Safety of Machinery - Electrosensitive protective equipment - part 2:
Active optoelectronic Protective Devices
Pr EN 999 Safety of Machinery - The positioning of protective equipment in
respect of approach speeds of parts of the human body
EN 294 Safety of Machinery - Safety distances to prevent danger zones from
being reached by the upper limbs
Pr EN 811 Safety of Machinery - Safety distances to prevent danger zones from
being reached by the lower limbs
pr EN 692 « Machine-tool - Safety - Mechanical Presses »
pr EN 693 « Machine-tool - Safety - Hydraulic Presses »
pr EN 12622 « Hydraulic press brakes - Safety »
pr EN 201 « Injection plastic moulding machines »
pr EN 289 « Compression moulding and transfer machines »
pr EN 11553 « Laser for material processing »
EN 775 « Manipulating Industrial Robots »
EN 415-1 « Safety of packaging machines - Part 1: Common requirements »
EN 415-2 « Safety of packaging machines - Part 2: Preformed rigid container
packaging machinery »
EN 415-3 « Safety of packaging machines - Part 3: Form, fill and seal machines »
EN 415-4 « Safety of packaging machines - Part 4: palletisers and depalletisers »
1.9 United States Regulations Compliance
US Regulation Title
OSHA 29 CFR 1910.212 General Requirements for (guarding of) All Machines
OSHA 29 CFR 1910.217 (Guarding of) Mechanical Power Presses
•
Safety light curtains may be used as primary protection for machines where the
movement of the functional parts can be interrupted at any moment in a dangerous
phase.
•
Safety light curtains may be used as primary protection for machines on which the
control circuit has been designed in such a manner that a fault in one component
does not result in any risk.
•
Cancellation of the safety light curtain stop signal must not cause the restart of the
moving parts. The function to restart can only be initiated by means of a control
designed for this purpose.