manualshive.com logo in svg

Hioki ST5540, Instruction Manual, Page: 73 / 326

Share
Download
Hioki ST5540 Instruction Manual Download Page 73

4.8  Changing the Measurement Method (Auto/Manual)

67

3

Cha

pter 4  

Se
ttings

4

(1) Manual measurement

The measurement value can be checked while changing the target current, filter setting, power
supply polarity, and equipment status.

(2) Automatic measurement

The power supply polarity and equipment status are automatically switched during measure-
ment.
The item to be switched automatically can be selected and the measuring time set.

Measurements start when measurement is set to "Manual" in the measurement screen. Measurement
conditions can be changed during ongoing measurements. Continue to "Chapter 5  Measurement Prepa-
rations" (p. 75). 
Make the following settings to make automatic measurements. 

4.8 Changing the Measurement Method

(Auto/Manual)

1.

On the measurement screen, press 

 to display the manual/auto measurement setting 

screen.

2.

Select a measurement mode.

For manual measurement

For automatic measurement

Setting screen

 (Manual measurement)

Setting screen

 (Automatic measurement)

Return to
measurement 
screen. 

Return to
measurement 
screen. 

1

Summary of Contents for ST5540







































































































































































































































































































































Reviews:

No comments