Hioki ST5540 Instruction Manual Download Page 139

Page: 139 / 326

7.12 Interface Setting (For Communication and Printing)

133

Cha

pter 7

Instru

ment

Syste

Settings

7.12 Interface Setting

(For Communication and Printing)

Press

on the initial screen to display the system screen.

Press

to display the interface setting screen.

Select an interface.

Sets the interface connection destination to
USB.

Sets the interface connection destination to
RS-232C.

Sets the interface connection destination to
Printer.

Interface setting screen

The interface is set to USB by default.

When "USB" is selected

The communication condition is fixed.

See

For details of the method of using the interface

ÅF

"Chapter 8 Controlling the Instrument From a Computer
(RS-232C, USB interface)" (p. 139)

Press

to return to the system screen.

Summary of Contents for ST5540







































































































































































































































































































































Search results

Summary of Contents for ST5540

Reviews:

Hioki ST5540, Instruction Manual, Page: 139 / 326

Search results

Summary of Contents for ST5540

Reviews: