manualshive.com logo in svg

Hioki ST5540, Instruction Manual, Page: 154 / 326

Share
Download
Hioki ST5540 Instruction Manual Download Page 154

8.4  Command Message Description

148

Message 
Terminators

The HiTESTER supports the following message terminators.

The following response message terminators can be selected depending
on the interface setting.

•

For details of the method of setting an interface :

 

See

"7.12  Interface Setting (For Communication and Printing)" (p. 133)

Separators

(1) Message unit separator

A semicolon "

;

" is used as a message unit separator when it is desired to

set out several messages on a single line.

When messages are combined in this way, if a syntax error occurs, all
subsequent messages up to the next terminator will be ignored.

(2) Header separator

In a message which has a header and data, a space " " is used as the
header separator to separate the header from the data.

(3) Data separator

If a message has several data items, commas are required as data sepa-
rators for separating these data items from one another.

• CR
• CR+LF

• CR and LF

:NETWork A;*IDN?

:NETWork A

:CONFigure:COMParator 

+

1.000E-3,+5.000E-3

Summary of Contents for ST5540







































































































































































































































































































































Reviews:

No comments