Hioki ST5540, Instruction Manual, Page: 271 / 326

10.10 PC Interfaces
265
8
9
Chap
ter 10
S
pe
c
ificat
ions
10
RS-232C interfaces
Communication content
:
Remote control, Measurement value output
Transmission system
:
Synchronous communication, full duplex
Transmission speed
:
9,600 bps, fixed
Data bit length
:
8 bits, Stop bit
:
1, Parity bit
:
None
Delimiter
:
CR+LF
Handshake
:
None
XON/XOFF
:
Not used
Connector
:
D-sub 9-pin, male, connector retaining screws (#4-40)
USB interfaces
Communication content
:
Remote control
,
Measurement value output
Conforms to USB V1.1 (RS-232C conversion, 9600 bps)
Connector
: Series A receptacle
10.10 PC Interfaces
10.11Printer
The 9442 Printer (option) is required for printing measurement data.
Printer output RS-232C interface terminal used
Printer, printer cable, AC adapter and printing paper are separately sold
Printed
information Date of measurement (2009/10/01)
Equipment name (ELECTRIC-123)
Control number (123456789012)
Network (B)
Class ( I, II, Internal)
Applied part (B, BF, CF) only network B1 and B2
Measurement mode (Earth leakage current,
Enclosure leakage current, and so on)
Filter setting (ON, OFF)
Target current (AC, DC, AC+DC, ACPeak)
Allowable value (1.000 mA)
Maximum value (0.567 mA)
Judgment result (PASS/FAIL/LOW)
Power supply polarity (Positive phase, Negative phase)
Equipment status (Normal, Disconnected
grounding wire, and so on)
S10, 12, 13 test results*
Information to be printed can be selected from the items above.
All data is printed in English
*
only ST5540