GK600 User Manual
Chapter 4 Operation and Run Instructions
- 61 -
4.1.3.8 Prompt Message Status
Prompt message status shall be displayed upon the completion of some operations. For
instance, the "bASIC" prompt message would be displayed upon the completion of parameter
initialization.
Fig. 4-8 Prompt message status
Prompt message characters and their meanings are shown as specified in Table 4-4.
Table 4-4 Prompt characters
Prompt
symbol
Meaning
Prompt
symbol
Meaning
bASIC
When A0-01 is set to 0
CPyb1
Backup parameter value
dISP1
When A0-01 is set to 1
LoAd
Parameter upload to
control panel
USEr
When A0-01 is set to 2
dnLd1
Parameter download from
control panel (motor
parameter excluded)
ndFLt
When A0-01 is set to 3
dnLd2
Parameter download from
control panel (motor
parameter included)
LoC-1
Control panel locked 1 (full locked)
P-SEt
Password has been set
LoC-2
Control panel locked 2
(all locked except RUN,
STOP/RESET)
P-CLr
Password cleared
LoC-3
Control panel locked 3
(all locked except STOP/RESET)
TUNE
Motor parameter
identification in process
