Chapter 3 Installation and Wiring GK600 User Manual
- 26 -
a) Method 1 b) Method 2
Fig. 3-5 Open the cover
Mount the cover
On the completion of wiring, insert the buckle at higher part of the cover into the grooves at
middle housing as indicated by number "1" in Fig. 3-6, then push in the lower part of the
cover as indicated by "2". When a "click" sound heard, it indicates clamping has been
properly made. Tighten the screws (provided only for 11/15kW model) in buckle grooves
as finish.
Fig. 3-6 Mount the cover
Mount the control panel
Use the mounting method as stated in Section 3.3.1.
ATTENTION:
Be sure to remove the control panel before opening the cover and mount the cover before
mounting the control panel.
1
1
2
1
1
螺丝刀
Screwdriver
