GTAKE GK600 Series, Manual

Page: 107 / 277

GK600 User Manual Chapter 5 List of Parameters
- 99 -
Parameter Designation Scope
Factory
default
Attr
6: X6/DI pulse input
7: Process PID output
8: Communication
F1-02 Multi-step FREQ 0 Lower limit FREQ ~ upper limit FREQ 0.00Hz
△
F1-03 Multi-step FREQ 1 Lower limit FREQ ~ upper limit FREQ 0.00 Hz △
F1-04 Multi-step FREQ 2 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-05 Multi-step FREQ 3 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-06 Multi-step FREQ 4 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-07 Multi-step FREQ 5 Lower limit FREQ ~ upper limit FREQ 0.00 Hz △
F1-08 Multi-step FREQ 6 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-09 Multi-step FREQ 7 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-10 Multi-step FREQ 8 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-11 Multi-step FREQ 9 Lower limit FREQ ~ upper limit FREQ 0.00 Hz △
F1-12 Multi-step FREQ 10 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-13 Multi-step FREQ 11 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-14 Multi-step FREQ 12 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-15 Multi-step FREQ 13 Lower limit FREQ ~ upper limit FREQ 0.00 Hz △
F1-16 Multi-step FREQ 14 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
F1-17 Multi-step FREQ 15 Lower limit FREQ ~ upper limit FREQ 0.00 Hz
△
Group F2 Simple PLC
F2-00 Simple PLC run mode
Ones place: PLC run mode
0: Stop after a single cycle
1: Continue to run in the last FREQ after
a single cycle
2: Cycle repeated
Tens place: power loss memory
0: No memory on power loss
1: Memorized on power loss
Hundreds place: starting mode
0: Run from the first step “multi-step
frequency 0”
1: Continue to run from the step of stop
(or fault)
2: Continue to run from the step and
FREQ at which run stopped (or fault
occurred)
Thousands place: unit of simple PLC
run time
0: Second (s)
1: Minute (min)
0000 ×