GTAKE GK600 Series, Manual

Page: 217 / 277

GK600 User Manual Chapter 6 Specification of Parameters
- 209 -
At most 16-step of frequency can be set through the combination of "multi-step frequency
terminals 1~4" of digital input. Multi-step frequency 2~15 are only digital setting while a number
of setting sources can be selected for multi-step frequency 0~1. Parameter value of F1-01
determines command source of step 1.
F1-02
Multi-step frequency 0
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00Hz
F1-03 Multi-step frequency 1
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-04 Multi-step frequency 2
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-05 Multi-step frequency 3
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-06 Multi-step frequency 4
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-07 Multi-step frequency 5
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-08 Multi-step frequency 6
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-09 Multi-step frequency 7
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-10 Multi-step frequency 8
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-11 Multi-step frequency 9
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-12 Multi-step frequency 10
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-13 Multi-step frequency 11
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-14 Multi-step frequency 12
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-15 Multi-step frequency 13
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-16 Multi-step frequency 14
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
F1-17 Multi-step frequency 15
Lower limit frequency ~ upper
limit frequency
Factory default:
0.00 Hz
At most 16 steps of multi-step frequency can be set by different status combinations of
"multi-step frequency terminals 1~4" of digital input, as shown in Table 6-18.