GTAKE GK600 Series, Manual

Page: 109 / 277

GK600 User Manual Chapter 5 List of Parameters
- 101 -
Parameter Designation Scope
Factory
default
Attr
F2-08 Run time of step 3 0.0s(min)~6000.0s(min) 0.0s
△
F2-09 Setting of step 4
Ones place: FREQ setting
0: Multi-step FREQ 4 (F1-06)
1~7: Same as F2-01
Tens place: run direction (same as
F2-01)
Hundreds place: Accel/Decel time
option (same as F2-01)
000 ×
F2-10 Run time of step 4 0.0s(min)~6000.0s(min) 0.0s △
F2-11 Setting of step 5
Ones place: FREQ setting
0: Multi-step FREQ 5 (F1-07)
1~7: Same as F2-01
Tens place: run direction (same as
F2-01)
Hundreds place: Accel/Decel time
option (same as F2-01)
000 ×
F2-12 Run time of step 5 0.0s(min)~6000.0s(min) 0.0s
△
F2-13 Setting of step 6
Ones place: FREQ setting
0: Multi-step FREQ 6 (F1-08)
1~7: Same as F2-01
Tens place: run direction (same as
F2-01)
Hundreds place: Accel/Decel time
option (same as F2-01)
000 ×
F2-14 Run time of step 6 0.0s(min)~6000.0s(min) 0.0s △
F2-15 Setting of step 7
Ones place: FREQ setting
0: Multi-step FREQ 7 (F1-09)
1~7: Same as F2-01
Tens place: run direction (same as
F2-01)
Hundreds place: Accel/Decel time
option (same as F2-01)
000 ×
F2-16 Run time of step 7 0.0s(min)~6000.0s(min) 0.0s
△
F2-17 Setting of step 8
Ones place: FREQ setting
0: Multi-step FREQ 8 (F1-10)
1~7: Same as F2-01
Tens place: run direction (same as
F2-01)
Hundreds place: Accel/Decel time
option (same as F2-01)
000 ×
F2-18 Run time of step 8 0.0s(min)~6000.0s(min) 0.0s △
F2-19 Setting of step 9 Ones place: FREQ setting 000 ×