Chapter 5 List of Parameters GK600 User Manual
- 112 -
Parameter
Designation
Scope
Factory
default
Attr
4: Accel overvoltage (ov1)
5: Constant-speed overvoltage (ov2)
6: Decel overvoltage (ov3)
7: Module protection (FAL)
8: Autotuning failed (tUN)
9: Drive overloaded (oL1)
10: Motor overloaded (oL2)
11: Current detection abnormal (CtC)
12: Ground short-circuit protection at
output side (GdP)
13: Input power supply fault
(ISF)
14: Phase loss at output side (oPL)
15: Inverter module overloaded (oL3)
16: Module overheated (oH1)
17: Motor overheated (PTC) (oH2)
18: Module temperature detection
disconnection (oH3)
19: Reserved
20: Abnormal option board
connection (EC1)
21: Reserved
22: Control board flat cable
connection abnormal (dLC)
23: Analog terminal functional mutex
(TEr)
24: External equipment malfunction
(PEr)
25: Reserved
26: Continuous run time attained (to2)
27: Accumulative run time attained
(to3)
28: Power supply abnormal in running
(SUE)
29: EEPROM read/write fault (EPr)
30: Contactor close fault (CCL)
31: Port communication abnormal
(TrC)
32: Control panel communication
abnormal (PdC)
33: Parameter copy fault (CPy)
34: Reserved
35: Software version compatibility
