Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK218MC Series Machining Center CNC System PLC & Installation Connection Manual
82
Volume II
Operatio
n
CHAPTER THREE PLC ADDRESS AND PARAMETER SETTING
The addresses and parameters, such as the counter, timer, data list and nonvolatile relay may
be used in the PLC; the viewing and setting of these addresses and parameters should be
performed in the corresponding interface. Press the
[PLCPAR]
soft key again in the PLCPAR
interface, then enter the PLC address and parameter setting interfaces, refer to the
Fig. 3-1
, which
includes the nonvolatile relay, timer, data list, counter, F address corresponding with the M function.
It is used for checking and setting these addresses, parameters and data list. (User can set it after
the debugging password is input and gained an authority)
Fig. 3-1
3.1 Nonvolatile/Hold Relay
Press the
[KPAR]
soft key in the
Fig. 3-1
, then enter the checking and setting interfaces of the
nonvolatile replay, refer to the
Fig. 3-1-1
.
