Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter Three PLC Address And Parameter Setting
83
V
o
lume II
Operatio
n
Fig. 3-1-1
The content and operation of the nonvolatile replay interface:
RUN :
Ladder diagram operation state.
ADDR :
Nonvolatile relay address.
Bit0~Bit7 :
Bit number state of the nonvolatile replay address.
1: This address remains the state before power off after the power is turned off;
0: This address resets on default state after the power is turned off.
Input :
Input data display.
MDI mode :
Current working mode.
[Return] :
Return to the previous menu.
[
X
] :
Enter next page.
The set value can be downloaded to the CNC operation pressing the <
Save
> key after
modifying. “KPAR downloading successful” displays after the save is performed; the system displays:
“downloading fail” when the save is incorrect; the “illegal downloading parameter” displays without
downloading conditions.
(
Note
: It can be saved and operated by pressing the <
Save
> after modifying. K000~~K005 are
used by the system. Refer to the Appendix One and Three for details)
The search and positioning can be performed by the page-up, page-down and four direction
keys on the panel; checking and modifying of the nonvolatile relay address can be performed.
