Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK218MC Series Machining Center CNC System PLC & Installation Connection Manual
94
Volume II
Operatio
n
4.3.2 Selection of Figure
In the editing view of the ladder diagram, the black rectangle shadow means cursor, click the left
key of the mouse in the figure editing area between two bus cables, and select the position where
the figure unit needs to be edited. Refer to the following figure.
Fig. 4-3-2-1
When the block is selected, press the mouse left key at the beginning position of the block, then
drag to the end. The selected area indicates by the rectangle with dotted line before releasing the
left key.
Fig. 4-3-2-2
The inverted color of the whole ladder diagram after releasing, that is, the ladder diagram within
this rage is selected, and the next operation can be performed. For example, cutting, deletion and
copy etc.
Fig. 4-3-2-3
