Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Appendix III File Format of Ladder Diagram Configuration
319
Appendix
APPENDIX III FILE FORMAT OF LADDER DIAGRAM
CONFIGURATION
The signal in the ladder diagram configuration file
LadChixx.txt (“xx”
is corresponding to the
ladder diagram file number set by system
)
stores the following information in terms of the fixed
sequence.
I. F Signal and Meaning of the M Code M00---M99
Format:
Mxx + Space + Fyyyy + Space + Chinese note + Enter character (Enter)
For example:
“M00 F0317 Program dwell”
Wherein:
“xx” is 00, 01, 02… 99 in turn, total 100 numbers and its sequence can not be altered.
Normally, the “Space” is one space and can not add other characters.
“yyyy” means the M code corresponding the value of the F signal, for example: F0317 means
F31.7”, it can be set from 026 to 0337 (that is, the F signal is from 26.0 to 33.7). If it is set to “-001”, it
will not be registered, and the system will not identify the M code. “Up to 32 Chinese characters, it
also can be set as 16 Chinese characters or the equivalent Chinese char Characters. The
following descriptions are identical.
“Enter character” means the end of this line, and the following characters will not be identified. It
is same as the following descriptions.
II. That the “%” Takes One Single Line Means that the M code
Information Storage is End
III. The Code and Meaning of the X Signal X0.0---X6.7
Format:
Xxxxx + Space + Chinese note + Enter character (Enter)
For example:
“X0000 + stroke limit signal along with X axis”
Wherein:
“xxxx” means the value of the X signal, for example: “0000 means 0.0”, “0067 means
6.7”, it is from 0000 to 0067 in turn (that is, the X signal is from 0.0 to 6.7) and its sequence can not
be altered.
Normally, the “Space” is 5 spaces, and can not add other characters, the following descriptions
