Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter Seven Miscellaneous Function
131
V
o
lume
III Function
actually.
[Condition output]
Refer to the “S code miscellaneous function in Section 7.2” for the
output condition and performance process.
The end signal of S code miscellaneous function
SFIN<G000#4>
The response signal of S code miscellaneous function
SRESP<G063#1>
[Type]
Signal input
[Function]
It means that the S code miscellaneous function is completed.
[Motion]
Refer to the “S code miscellaneous function in the Section 7.2” for the treatment
and performance process of the control unit.
Tool function strobe signal
BF
（
F007
＃
3
）
[Type]
Signal output
[Function]
These signals are shown that the tool function has been specified actually.
[Condition output]
Refer to the “T code miscellaneous function in Section 7.3” for the
output condition and performance process.
Tool function end signal
TFIN<G000#5>
[Type]
Signal input
[Function]
It means that T code miscellaneous function is completed.
[Motion]
Refer to the “T code miscellaneous function in Section 7.3” for the treatment and
performance of the control unit.
Miscellaneous function end signal
FIN
（
G000
＃
0
）
[Type]
Signal input
[Function]
This signal shows the end of the M, S and T code miscellaneous functions.
[Motion]
When this signal is 1, refer to the explanations in Section 7.1, 7.2 and 7.3 for the
operation and treatment of the control unit.
Caution
All of these functions abovementioned are shared with one end signal FIN (G000#0); this signal
should be set to 1 after the overall functions are completed.
Signal address
TFIN
SFIN
MFIN
FIN
G000
＃
7
＃
6
＃
5
＃
4
＃
3
＃
2
＃
1
＃
0
SRESP
MRESP
G063
