Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK218MC Series Machining Center CNC System PLC & Installation Connection Manual
64
Volume II
Operatio
n
CHAPTER ONE PLC INTERFACE DISPLAY
1.1
GSK218MC Series Automatic Operation in PLC ON
PLC operates when the system is turned on: the 1
st
period may use the R510.0 to conduct a
period of its network cables, the value of the R510.0 is then reset to “0”; the user can not output this
value. The value of the nonvolatile relay is the one of the last output before PLC stops.
Note:
The keys inside the < > in the following explanations are panel buttons; the keys inside the
【
】
is the soft
button under the screen;
【
】
is the interface corresponding with the current soft key;
means that it includes
submenu; all of the PLC operations are performed in the MDI mode, other methods only can be viewed and
searched.
1.2 Program-Controlled Interface Display
1.2.1 INFO Interface
1. Enter the page by pressing the <
program-controlled
> key; enter the
INFO
interface
pressing the
[INFO]
soft key, refer to the Fig.
1-2-1-1
. Also, it can be set the <
program-controlled
>
key to shift the screen in the PLC interface by defining the bit parameter
No: 26#6=1
, and then enter
the
INFO
interface. This interface offers some relative information of this system, such as the
version number, modification data etc.
Fig. 1-2-1-1
(1) The ladder diagram name in current operation is supplied on the interface. The ladder diagram
