Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK218MC Series Machining Center CNC System PLC & Installation Connection Manual
66
Volume II
Operatio
n
diagram maintainer) by the “modification” key.
1.2.2 PLCGRA Interface
Enter
PLCGRA
interface pressing the
[
PLCGRA]
soft key, it also can be set the
<
Program-controlled
> key to shift the screen in the PLC interface by defining the bit parameter
N0:
26#6=1,
and then enter the
PLCGRA
interface. Refer to the
Fig. 1-2-2-1
:
Fig. 1-2-2-1
The content and operation of the
PLCGRA
interface:
PLCGRA [ladder01]:
Operate the current ladder diagram name.
1/972:
It means that the cursor specified line is at the place of the ladder diagram.
Run:
Ladder diagram operation state. The operation state of the ladder diagram includes RUN,
STOP and DEBUG.
Figure area:
Ladder diagram program
Input:
Display the input data. The input data can be enquired pressing the
on the panel.
MEA:
The note of cursor positioning node
MDI:
Current working method (The ladder diagram can be modified only in the MDI mode).
The searching and positioning can be performed by the page-up, page-down and other
direction keys, the components then can be viewed and modified.
1.2.3 PLCPAR Interface
Enter
PLCGRA
interface pressing the
[
PLCGRA]
soft key, it also can be set the
