Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter Four User Explanation of Ladder Diagram Software Edit Appendix
95
V
o
lume II
Operatio
n
4.3.3 Editing of Figure
4.3.3.1 Cutting
There are three ways for carrying out this operation after the ladder diagram area to be edited is
selected:
1. Select the cutting after springing the environment menu by clicking the right key of the mouse;
2. Select the Edit [Alt+E]--- Cutting [T] of the main menu;
3. Shortcut key [Ctrl+X].
The cut content is placed to the clipboard, which is copied to the ladder diagram by the paste
operation.
4.3.3.2 Copy
There are three ways for carrying out this operation after the ladder diagram area to be copied
is selected:
1. Select the copy after springing out the environment menu by clicking the right key of the
mouse;
2. Select the Edit [Alt+E]--- Copy [C] of the main menu;
3. Shortcut key [Ctrl+C].
The selected content after copying is put to the clipboard, which is copied to the ladder diagram
by the paste operation.
4.3.3.3 Pasting
There are three ways for carrying out this operation after the ladder diagram area to be pasted
is selected:
1. Select the pasting after springing out the environment menu by clicking the right key of the
mouse;
2. Select the Edit [Alt+E]--- Pasting [P] of the main menu;
3. Shortcut key [Ctrl+V].
4.3.3.4 Deletion
There are three ways for carrying out this operation after the ladder diagram area to be deleted
is selected:
1. Select the basis code ---- Deletion node after springing out the environment menu by clicking
the right key of the mouse once;
