Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK218MC Series Machining Center CNC System PLC&Installation Connetion Manual
104
V
o
lume
III Function
CHAPTER TWO OPERATION PREPARATION
2.1 ESP
Brief:
The machine immediately stops by pressing the ESP button on the operation panel of the
machine tool.
ESP button
Red
Fig. 2-1
The button is locked after pressing; the releasing methods are differing from the manufactures.
Usually, the button can be released by left-rotation.
Signal ESP Signal
ESP
（
G001.0
）
[Type] Signal input
[Function] The machine immediately stops after inputting the ESP signal.
[Purpose] When the ESP turns into 1, CNC is reset, and then the machine is on the ESP
state.
Signal address
2.2 CNC Overtravel Signal
Brief:
The limit switch operates, and the tool decelerates and stops when the tool movement
exceeds the stroke end set by the machine tool limit switch, the overtravel alarm is then
displayed.
Signal Overtravel signal
＋
L1
～＋
L5 (G012#0~G012#4)
＃
7
＃
6
＃
5
＃
4
＃
3
＃
2
＃
1
＃
0
ESP
G001
