Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 274 / 392

The second part of the additional message has the form
d=#
where # is the number of bits that make up the
pixel depth. The third part of the additional message is
displayed only when a z-buffer option is installed on a
2D graphics accelerator module. The third part of the
additional message has the form
z=24
.
Individual configuration displays begin with the same line that
describes the module in the general system configuration.
Base system configuration displays
To obtain a base system configuration display, type cnfg 3 and
press Return.
Display with the R4000 CPU Module
This is a sample configuration
display for the base system configuration:
>>cnfg 3
3: KN04 DEC V1.0a TCF0 ( 32 MB)
(enet: 08-00-2b-2d-84-c7)
(SCSI = 7)
---------------------------------------------------
DEV
PID VID REV SCSI DEV
===== ================== ========== ====== ========
rz1
RZ25 (c) DEC DEC 0500 DIR SCSI device info
rz2 RZ55 (c) DEC DEC 0900 DIR
rz3 RRD42 (c) DEC DEC 1.4a CD-ROM
cache: I( 8 KB), D( 8 KB), S(1024 KB); Scache line (32 bytes)
processor revision (3.0)
mem( 0):
a0000000:a07fffff ( 8 MB)
mem( 1): a0800000:a0ffffff ( 8 MB)
mem( 2): a1000000:a17fffff ( 8 MB)
mem( 3): a1800000:a1ffffff ( 8 MB)
Note in the above example, the screen output is the same as a
R3000 based system, with two exceptions:
1.
cache line of the R4000 screen changes to Instruction, Data,
Secondary and Secondary cache line size on an R4000-type
system.
C–12 Console Commands