Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 86 / 392

WS33M093
Start
No
Yes
Insert two good memory
modules into slot 0 and at
least 8 Mbytes of memory
total in the system.
Does the power-up
self-test still stop and the
LEDs display 0011 0110?
Replace the remaining
memory modules one pair
at a time. After you insert
each pair, type
followed by the slot number
of the memory modules that
you just installed. Then
press Return.
Replace any modules that
report an error after you run
the memory test. Refer to
"To Interpret Memory Test
Error Messages" later in this
chapter for an explanation
of memory test error
messages.
3/mem
End
End
Replace the system module. Refer to
"Removing and Installing a System
Module" in Chapter 5 for directions.
Figure 4-3. Troubleshooting when the LED display is 0011 0110
4–8 Identifying Failed FRUs