Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 353 / 392

Table D-32 lists error codes and descriptions used in SCSI
target test error messages.
Table D-32. SCSI Target Test Error Codes and Descriptions
Error Code and
Description Meaning
(1: ( dev ol) N ) Test could not bring the device on line. N
represents the SCSI ID of the device that could
not be brought on line.
(2: ( tst nocomp) N ) Command entered from the keyboard aborted the
test. N represents the SCSI ID of the device being
tested.
(3: (ro dev)
N
)
Test cannot perform write operation. Device is a
read-only device.
N
represents the SCSI ID of the
device specified in the test.
(4: (dev type) N ) Test does not test on the specified device. N
represents the SCSI ID of the device specified in
the test.
(6: (rdCap) N ) Read capacity command failed. N represents the
SCSI ID of the device that could not be brought
on line.
(7: (rzWr)
N
) Write operation failed.
N
represents the SCSI ID
of the device that failed.
(8: (rzRd) N ) Read operation failed. N represents the SCSI ID
of the device that failed.
(9: (cmp) N ) Write and read values did not match. N
represents the SCSI ID of the device involved
in the miscompare.
(10: (wrFlMrk)
N
) Write file mark failed.
N
represents the SCSI ID
of the device being tested.
(11: (tzWr) N ) Write operation failed. N represents the SCSI ID
of the device that failed.
(12: (wrFlMrk) N ) Write file mark failed. N represents the SCSI ID
of the device being tested.
(13: (spc)
N
) Space (-2) operation failed.
N
represents the SCSI
ID of the device involved in the failure.
(continued on next page)
Base System Test Commands and Messages D–61