Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 310 / 392

Table D-8 lists error codes and descriptions used in SCC pins
test error messages.
Table D-8. SCC Pins Test Error Codes and Descriptions
Error Code and
Description Meaning
1:Ln N Invld
param [ xxxxx ]
The number used in the test command to specify the
loopback was invalid. N represents the number of the
serial line in which the error occurred. xxxxx represents
the first two characters of the invalid value that was
specified.
2:Ln N Strtup
R- xx xptd= yy
actl= zz
| pins |
Test failed to generate the expected SCC status bits. N
represents the number of the serial line in which the
error occurred. The Startup R value is the number of SCC
register that contains the status bits. The xptd value is
the expected status bits. The actl value is the actual status
bits. (pins) represents the pin pairs for which the test was
set up.
3: Ln N xxxxx Pins failed to respond properly. xxxxx represents the
numbers of one or more pin pairs that failed the test.
D–18 Base System Test Commands and Messages