Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 62 / 392

How to Run Test Scripts
Use the sh command to run a test script.
To run a test script once and then stop, type sh followed
by the slot number of the script, a slash ( / ), and the name
of the test script you want to run, then press Return. For
example, to run the quick pst on the option module in slot
1, type sh 1/pst-q .
To have a test script run and keep looping until you press
Ctrl-c, type sh -l followed by the slot number of the script,
a slash ( / ), and the name of the test script you want to run,
then press Return.
How to Display Lists of Available Tests
To display a list of all individual tests available for a specific
module, type t
slot_number
/ ? , where you replace
slot_number
with the slot number of the module for which you want a list of
tests, then press Return.
The monitor displays a list of tests similar to this sample listing
of tests for the system module:
cache/data I or D[D] address[80050000]
cache/isol I or D[D]
cache/reload I or D[D] address[80050000]
cache/seg I or D[D] address[80050000]
ecc/gen address[A0100000]
fpu
mem
board[0] thrsld[10] pattern[55555555]
mem/init
mem/float10
address[A0100000]
mem/select
mfg/done
misc/pstemp
misc/refresh
misc/wbpart
rtc/nv
pattern[55]
rtc/period
rtc/regs
rtc/time
tlb/probe
tlb/reg
pattern[55555555]
3–6 Troubleshooting Tools