Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 277 / 392

The following is a sample Ethernet controller configuration
display for an Ethernet controller option module in slot 1:
1: PMAD-AA DEC V5.2a TCF0 (enet: 08-00-2b-0c-e0-d1)
The Ethernet controller configuration display has the same
meaning as the Ethernet controller description in the general
system configuration display. For an explanation of the
Ethernet controller configuration display, refer to ‘‘General
system configuration displays’’ on page C-10.
SCSI controller displays
To display a SCSI controller option module configuration,
type
cnfg
slot_number , where you replace slot_number with
the slot number of the SCSI controller option module.
To see the base system SCSI controller configuration,
display the base system configuration display by typing
cnfg 3 and pressing Return. The base system SCSI
controller configuration is displayed with the other base
system configuration information.
The following is a sample configuration display for a SCSI
controller in slot 2 that supports two hard disk drives, one
optical compact disc drive, and one tape drive:
2: PMAZ-AA DEC V5.2a TCF0 (SCSI = 7)
----------------------------------------------------
DEV
PID VID REV SCSI DEV
===== ================= =========== ======= ========
rz0
RZ55 (C) DEC DEC 0700 DIR
rz1 RZ56 (C) DEC DEC 0200 DIR
rz4 RRD40 (c) DEC DEC 0700 CD-ROM
tz5 SEQ
In the SCSI configuration display, the first line has the same
meaning as the SCSI description in the general system
configuration display. For an explanation of this first line,
refer to ‘‘General system configuration displays’’ on page C-10.
Lines following the first line describe drives on the SCSI bus.
DEV lists the general category of the drive and its SCSI
ID.
rz indicates that the drive is a hard disk or optical
compact disc drive.
Console Commands C–15