Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 101 / 392

between 0 and 6.
End End End
No
No
Yes
Replace the drive.
cnfg or cnfg 3 display now?
Does the device appear in the
Replace the cable that connects
the SCSI controller and the first
device in the bus.
Yes
(Continued)
missing device to an unused ID
Change the SCSI ID for the
cables are connected properly.
on and the SCSI and power
Make sure the device power is
cnfg 3 display?
missing from the cnfg or
Is an individual SCSI device
the missing bus.
Replace the SCSI controller for
Yes
replace the cable?
from the display after you
Is the SCSI bus still missing
No
WS33M095
(Continued)
A B
No
Type , followed by the slot
number of the SCSI controller.
Then press return. init
No
Figure 4-6. Troubleshooting when hardware does not appear in the
cnfg display
Identifying Failed FRUs 4–23