Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 124 / 392

WS33M099
Yes
setenv console s.
press Return.
Use any error messages that
appear on the terminal to
troubleshoot. Replace any FRU
that reports an error.
Reconnect any SCSI devices
that you disconnected earlier
and reset the environment
variables.
Replace the TURBOchannel
module that has the same slot
number as the number that
appears on the left LEDs.
Do the right LEDs
display 0011?
If the entire LED display is
0000 0000, replace parts of the
graphics hardware one by one
until the problem is corrected.
Reconnect any SCSI devices
that you disconnected earlier
and reset the environment
variables.
Connect the alternate terminal
to the system unit. Refer to
"Using an Alternate Terminal"
in Chapter 2 for directions.
No
End
End End
A
(Continued)
B
(Continued)
Type Then
Figure 4-18. Troubleshooting when ULTRIX is running but the monitor has
no display
4–46 Identifying Failed FRUs