Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 56 / 392

Shutting Down the System Software
If the system is running software, shut down the system before
you perform customer service. To shut down the software, type
the following command at the ULTRIX prompt:
/etc/shutdown -h ( now | hhmm | + n )
Specify the now parameter to shut down the software
immediately.
Specify
hhmm to shut down the software at a specific hour
and minute.
Replace hh with the hour to begin the shutdown.
Replace mm with the minute to begin the shutdown.
Specify +n to shut down the software in a specified number
of minutes. Replace
n
with the number of minutes until
shutdown begins.
The monitor displays the
>>
or
R>
prompt when shutdown is
complete.
2–20 Service Operations