Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 271 / 392

If you use any spaces or tabs in the boot environment
variable, you must surround the entire value with double
quotation marks. For example, to set the boot environment
variable to use the mop protocol to perform a multi-user
boot from the base system Ethernet controller in slot 3,
type setenv boot "3/mop -a" .
For details about the boot command parameters for each
TURBOchannel option module, refer to the respective
TURBOchannel option module documentation.
cat Command
Use the cat command to display the contents of a script.
The cat command format is
cat
slot_number/script_name
When you type the cat command,
Replace slot_number with the slot number of the module
that has the contents you want to display.
Replace
script_name with the name of the script for which
you want to display the contents.
For example, to display the individual self-tests contained in
the mem-m test script in the base system, type
cat3/test-mem-
m and press Return.
The following list of the individual tests that are in the test-
mem-m test script then appears on the monitor:
>>cat 3/test-mem-m
t ${#}/mem/select
t ${#}/misc/wbpart
t ${#}/mem 0 0 55555555 -q
t ${#}/mem 1 0 55555555 -q
t ${#}/mem 2 0 55555555 -q
t ${#}/mem 3 0 55555555 -q
t ${#}/mem 4 0 55555555 -q
t ${#}/mem 5 0 55555555 -q
t ${#}/mem 6 0 55555555 -q
t ${#}/mem 7 0 55555555 -q
t ${#}/mem/float10
Console Commands C–9