Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 275 / 392

2.
An additional Processor revision information line just below
the cache line.
Display with the R3000 CPU Module
This is a sample configuration
display for the base system configuration:
3: KN02-BA DEC V5.2A TCF0 ( 24 MB)
(enet: 08-00-2b-0f-45-72)
(SCSI = 7)
---------------------------------------------------
DEV
PID VID REV SCSI DEV
===== ================== ========= ====== ========
tz1
SEQ
rz2 RZ55 (C) DEC DEC 0700 DIR
rz4 RX23 (C) DEC DEC 0700 DIR
dcache ( 64 KB), icache ( 64 KB)
mem( 0): a0000000:a03fffff ( 4 MB)
mem( 1): a0400000:a07fffff ( 4 MB)
mem( 2): a0800000:a0bfffff ( 4 MB)
mem( 3): a0c00000:a0ffffff ( 4 MB)
mem( 4): a1000000:a13fffff ( 4 MB)
mem( 5): a1400000:a17fffff ( 4 MB)
Notice that the display begins with the same information as the
general system configuration display. The rest of the display
shows details of the devices and memory that are installed
in the base slot. This example shows three devices and six
memory modules.
The following list describes the information for the base system
devices
DEV lists the general category of the drive and its SCSI
ID.
rz indicates that the drive is a hard disk or optical
compact disc drive.
tz indicates that the drive is a tape drive.
The number at the end of the entry is the drive SCSI
ID.
Console Commands C–13