Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 337 / 392

Table D-21. Ethernet-DMA Registers Test Error Codes and Descriptions
Error Code and Description Meaning
(1: LDP wrt/rd [w= xxxxxxxx
r= yyyyyyyy ])
LDP register values matched when they
should not. The w parameter is the value
that was written to the LDP register. The r
parameter is the value that was read from
the LDP register.
(2: LIOS wrt/rd [w= xxxxxxxx
r= yyyyyyyy ])
LANCE I/O Slot register values matched
when they should not. The w parameter is
the value that was written to the LANCE
I/O Slot register. The r parameter is the
value that was read from the LANCE I/O
Slot register.
(3: LANCE select) LANCE I/O Slot register failed to select the
LANCE.
(4: LANCE deselect) LANCE I/O Slot register failed to deselect
the LANCE.
(5: err initing LANCE) Ethernet controller chip initialization failed.
(6: LANCE-init timeout) Timeout occurred waiting for the LANCE
initialization to finish.
(7: MER) Page boundary error was not recorded in
the MER register.
(8: SIR) LANCE memory error bit was not set in the
SIR register.
(9: LANCE-start timeout) Timeout occurred waiting for LANCE to
start.
Base System Test Commands and Messages D–45