Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 53 / 392

Inserting and removing a clear-NVR jumper
Figure 2-9 shows how to insert and remove a clear-NVR jumper.
To insert the jumper,
1.
Turn off the system unit.
2.
Locate the clear-NVR pins on the system module. The
clear-NVR jumper pins form a two-pin fixture.
3.
Slide the jumper entirely over the clear-NVR pins.
To remove the jumper, slide the jumper up and away from the
clear-NVR pins.
WS33M016
Clear-NVR jumper
Figure 2-9. How to insert and remove a clear-NVR jumper
Service Operations 2–17