Digital Equipment DECstation 5000/100 Series, Maintenance Manual

Page: 278 / 392

tz indicates that the drive is a tape drive.
The number at the end of the entry is the drive SCSI
ID.
PID lists the product ID for some types of drives.
The term on the left indicates the specific drive type.
The term on the right indicates the product manufac-
turer.
VID lists the drive vendor.
REV lists the firmware revision number for the drive.
SCSI DEV further describes the drive type.
DIR, which represents a direct access drive, appears in
entries for hard disk drives.
SEQ, which represents a sequential access drive,
appears in entries for tape drives.
CD-ROM appears in entries for optical compact disc
drives.
Color frame-buffer graphics module configuration displays
To obtain a color frame-buffer graphics module configuration
display, type cnfg slot_number , where you replace slot_number
with the slot number for the color frame-buffer graphics module
for which you want a configuration display, and press Return.
The following is a sample color frame-buffer graphics module
configuration display for a color frame-buffer graphics module
in slot 1:
0: PMAG-BA DEC V5.2a TCF0 (CX -- d=8)
The color frame-buffer graphics module configuration display
has the same meaning as the color frame-buffer graphics
module description in the general system configuration display.
For an explanation of the color frame-buffer graphics module
configuration display, refer to ‘‘General system configuration
displays’’ on page C-10.
C–16 Console Commands