Delta Electronics AH500, Manual

Page: 402 / 547

C h a p t e r 7 U n i a x i a l M o t i o n
3. Number of pulses generated by the manual pulse generator for the axis specified
(1+N)
th
axis
HW LW
100*N 100*N
[Description]

The value in (100*N, 100*N) indicates the number of pulses generated by
the manual pulse generator for the axis specified. If the pulses generated by the manual pulse
generator for the axis specified are clockwise pulses, the value in (100*N,
100*N) will increase. If the pulses generated by the manual pulse generator for the
axis specified are counterclockwise pulses, the value in (100*N, 100*N) will
decrease.

The value in (100*N, 100*N) does not vary with the values in 100*N
and 100*N.
4. Response speed of the manual pulse generator for the axis specified
(1+N)
th
axis
HW LW
- 100*N
[Description]

If the response speed set is high, the pulses output happen almost at the same time as the
pulse input by the manual pulse generator used.

If the response speed set is low, the pulses output follows the pulses input by the manual pulse
generator used.
Setting value Response speed
≧
5
4 ms (Initial value)
4 32 ms
3 108 ms
2 256 ms
1 or 0 500 ms
7 - 1 9